How you can Install LED Lighting on the Truck

LED lighting is utilized in trucks to signal copying, stopping or turning. Sometimes they're simply installed for decorative reasons. The easiest method to install LED lights on the truck is by using an LED Strip Light. This enables you to definitely attach many LED lights for your truck at the same time, as well as little electrical work. Installation is rather straightforward.

        1

        Clean the top of area where you'll be setting up the LED lights with rubbing alcohol along with a rag. Installation is going to be in the cheapest area of the truck's tailgate.

        2

        Install the LED light strip. Peel the backing from the adhesive strip on the rear of the strip. Put the LED lighting strip around the cheapest point around the truck's tailgate. Secure it towards the truck by pressing it in position. Drill pilot holes within the truck while using holes within the strip like a guide. Place the drill with the holes from the strip where it's been stuck. Drill with the metal body from the truck's tailgate. Place and tighten the provided screws in to the holes. Apply the provided nuts to the rear of the screws.

        3

        Run the wires from the Flexible LED Strip light with the space between your body and also the back bumper of the truck and also to the wiring adapter from the truck. The wiring adapter is situated underneath the bumper around the passenger side.

        4

        Attach the wires from the LED strip with individuals from the wiring adapter. You will see a wire on each device for "left," "right," "reverse" and "stop." Match the wires to each other. Twist each wiring connection together. Wrap the twists with electrical tape. Slide a wiring cap within the electrical tape.

        5

        Test the LED lighting strip. Switch on the18 wheeler. Make use of the right and left turn signals. Press the brake light. Place the truck backwards. Have someone else make sure the LED SpotLight corresponds to every action.