How you can Give a Red-colored LED to some Whitened LED to Warm Color

Setting up LEDs is really a relatively easy task. However, if you wish to mix colors to produce a unique lighting effect, you must have a great knowledge of the concepts involved. For instance, if you want to make whitened LEDs warmer and much softer in tone, you can include red-colored LEDs towards the mix. However, the mixture takes a subtle hands to find the look you would like.||LED Power
        1

        Disconnect energy towards the whitened LED you'll focus on. Remove all covers to reveal the whitened LED and it is wiring. Carefully take away the plastic wire coating from the wires connected to the whitened LED together with your wire blades. Try not to cut the wires themselves.

        2

        Make use of the wire blades to trim lower the red-colored LED's leads. One lead is going to be more than another. This is actually the negative lead. When trimming, always leave that one longer to assist identify later.

        3

        Warmth the soldering gun to the operating temperature. Contain the positive, shorter lead from the red-colored LED towards the positive wire and lead from the whitened LED. Solder in position.||LED DownLight
        4

        Contain the negative longer lead from the red-colored LED towards the negative wire and lead from the whitened LED. Solder in position.

        5

        Stop two bits of black electrical tape. Wrap one piece round the uncovered positive wiring and LED leads, and also the other round the negative wiring and LED leads. This can avoid the metal bad and the good aspects of entering contact, leading to a brief.

        6

        Close any covers towards the LED lights and reunite the energy. Test the lights for preferred effect.