Steps to make a Bicolor LED

 LED Panel Light is longer-lasting options to incandescent bulbs. Because LEDs last as much as six occasions more than other lights on a single battery strength, they're appropriate options for lamps and lights. Transforming a torch to LED is rather simple, but might be difficult for those who have no training with wiring. Creating a bicolor LED torch involves replacing 2 LED lights for 1 incandescent bulb.

1

Take away the incandescent bulb out of your existing torch. Either save the bulb or exercise caution when getting rid of from it to prevent damaged glass shards.

2

Choose 2 colors of Waterproof LED Module  to exchange the incandescent bulb with. Whitened and red-colored are generally common colors for LED lights and therefore are broadly available.

3

Locate the LED leads for LED lights. Trim the finishes from the leads using sharp wire blades. The leads ought to be about 1/4-inch lengthy for any small torch.

4

Place both teams of leads in to the bulb socket. Test the sunshine by activating the switch. When the LED lights don't illuminate, try curing the leads. When they still don't illuminate, remove among the LEDs to make certain that you're following a fundamental process properly for any LED.

5

Check to make certain the lead wires aren't touching each other because this will hinder the person LEDs illuminating and permitting your bicolor LED torch to work.

6

Take away the reflector panel in the existing torch and employ a drill bit to widen the opening to support the NON-Waterproof LED Module, that are typically bigger in base diameter than incandescent lights.

7

Replace the batteries from the existing torch with N-cell batteries for top light output in the bicolor LED. The amount of N-cell batteries needed and also the process for setting up them will differ with respect to the size the torch. You may want to create artificial spacers with battery contacts or screws to conduct electrical current with the excess space.